Specifications

n While operating the Manual Oiling Pump, the pump’s handle will repeatedly act backwards & forwards. The lubricating oilwill besent outby thecompression ofthe piston spring. Its oil amount & pressure depends on the viscosity.

n The pump is equipped with the check valve toprevent the oil flowing back. The pump’s pressure is over 15kg/cm2, so it is suitable for the big machines which oiling points are under 20point.

Model Deliverycapacity Operatingpressure Tank capacity A B C D E
                 
JY-16 8cc/times 15kg/cm² 660cc. 205 107 113 97 140
 
Specifications

n The Hand Pull Type Oiling Pump uses the hand pulling way for oiling. While operating, the pump’s plunger will repeatedly act backwards & forwards. The lubricating oil willbesent outby thecompression ofthe plunger spring. Its oil amount & pressure depends on the viscosity.

n The pump is equipped with the check valve toprevent the oil flowing back. The pump’s pressure is over 4kg/cm2, so it is suitable for the machines which oiling points are under 10 point.

Model Deliverycapacity Operatingpressure Tank capacity Effectivecapacity
JY-15 8cc/times 4kg/cm² 660cc. 500cc.
 
Specifications

n While operating the Manual Oiling Pump, the pump’s handle will repeatedly act backwards & forwards. The lubricating oilwill besent outby thecompression ofthe piston spring. Its oil amount & pressure depends on the viscosity.

n The pump is equipped with the check valve toprevent the oil flowing back. The pump’s pressure is over 15kg/cm2, so it is suitable for the big machines which oiling points are under 20point.

Model Deliverycapacity Operatingpressure Tank capacity A B C D E
JY-6 8cc/times 15kg/cm² 350cc. 170 85 100 85 128
JY-16 8cc/times 15kg/cm² 660cc. 205 107 113 97 140